Skip to content
McLarenblog

McLarenblog

Evaluate products and politics for you.

Macintosh Firewire hard drive for open microphone use.

Macintosh Firewire hard drive for open microphone use.

05/20/2007 Score Card Comments 0 Comment

I had to create five edit bays, a few years back, for a Broadcast Journalism program that allegedly got kicked out of a college lab facility for political reasons. Each new edit room was a closet sized room, close to being square in shape which was bad for standing waves. The small size was a problem as each edit bay would have a microphone available for voice overs to video and the close in walls would throw any ambiant sound into the microphone. I had to offer close microphone use and keep all the equipment in the room noise free as much as possible. I threw up Sonex to cut down the small room tone. I knew that I had to offer the customer an external hard drive. You never edit using the internal system hard drive in the computer!

Note: I personally edit video and audio on my Mac laptop but only after I defrag the hard drive. I would never do that for a customer but would edit to an external hard drive.

I am sure there are a lot of solutions to putting in a quiet hard drive into an edit bay. My research came up with the Glyph GT series of drives. I found that the drives would work with Pro Tools M-Box (1) and Final Cut Pro. I ordered one using my company Visa card and was quite satisfied with the drive so I ordered more as money came available. My one concern was that the manufacturer used Seagate hard drives. I prefer Hitachi for the Mac. I had conversations with the Glyph salesman and he assured me that they would warantee the drives in case any got noisy. If any drive became noisy I could send it back for a quick replacement. With over a year’s experience with this model I was totally pleased. Here are the reasons:

  • No Firewire I/O malfunction. I had no problems with the Firewire interface. I have heard it stated that the Oxford chip is the best and this drive has it.
  • The drives would mount at any time. If I booted up the computer and forgot to turn on the Glyph first, it would mount right after turning on the power. I did not have to wait very long. If I did a hot swap, the new inserted drive mounted right away. (Remember to put the drive icon into the trash representing the drive you want to remove or right click on a two button mouse the drive and select “Eject”).
  • This model, GT, allows the user to use a key to unlock a handle and slide out the hard drive and slip in another drive while the power is on and you do not have to reboot the computer. In other words this is a hot swap drive which is protected from being stolen in a lab environment.
  • I loved the dual Firewire ports. (This drive has no USB ports, only Firewire). Just make sure that before you plug in any Firewire cable, you first shut down power at both ends of the cable. I think this is how a lot of Firewire devices go bad. Because I had students working by themselves in the edit bays, they often times did not follow the warning notices I posted and interfaced their Firewire drive into our systems. I always asked the customer to loop out of the Glyph drive. I really did not want the computer Firewire port to go bad. It is a lot less expensive to replace the Glyph than the computer. I never had a Firewire port go bad on the computer or Glyph.
  • The drive ran cool. This case has a fan. I do hate to have any drive getting hot. I have heard that some hard drives must recalibrate if the internal temperature changes too much. I think this just might lead to dropped frames.
  • My last point should not make this inferior to the points previously made. The support from the salesperson and technical support was perfect. The shipping was FAST. This company is in New York and yet I got their drives so darn fast I was amazed. For me, this company has it together as an integrated fully functional business.
  • Because I was purchasing for an educational institution, I was able to arm twist free rack ears for each drive.
  • The case offered a number of case screws to attach anti theft cables.

The deficiencies as I see them:

  • This model only has Firewire 400, no 800 capability comes with this model (GT). My experience is that the 400 offered enough transfer rate for all of our video and audio projects.
  • There is no USB I/O.
  • The keys to lock and unlock the slide tray are all the same. It would be quite easy for someone to easily get the master key and steal all of your drives. Each hard drive that I purchased came with multiple keys. I had to take special care not to leave any keys laying around. Because this drive is not your typical drive that just anyone is going to buy, the chances that your customers will come into possession of the key is remote. I just wish Glyph would offer different keys and make a certain pattern of key available for institutional purchase so the technicians only had to have one key to unlock THEIR drives.

Computers, Product Reviews
Utilities for the Mac, Alsoft DiskWarrior.

Utilities for the Mac, Alsoft DiskWarrior.

05/20/2007 Score Card Comments 0 Comment

I put together a small lab of computer work stations to edit short video and audio for the Broadcast Journalism and RTVF in a college. I chose to buy Glyph hard drives as they had a reputation of running quiet for open microphone use. I could hot swap the drives out to keep the edit bays functional, another neat feature. I called their technical support and had a wonderful conversation with a gentleman about how best to keep the dives up and running. I was told that the most important software to get was DiskWarrior by Alsoft. After a few years of using this product, I completely endorse its use. It does one thing, repairs disk directories. But it does it very well. I have never had a problem come out of running this utility. It solves problems; it does not create any. The down side is it takes a LONG time to load from a CD. I created a separate USB floater hard dive with an operating system on it and this software so I could cut down on the time it took to run the program. For my edit bays, I ran this program the beginning of each week. If for any reason I forgot or failed to run it past seven days, I found I began to see performance problems begin to increase in some of the edit bay computers. So for school lab use, run this once a week. For the home user, run it at least once a month.

In my opinion, of all the utilities I ran in my edit bays and home computers, directory problems come up being the most troublesome.

Tip: I found that it is best to run this program more than once. Keep running it (typically twice) until you do not see any more errors.


Computers, Product Reviews
Alsoft Disk Warrior, Disk Warrior product review, Disk Warrior review
Speed up Mac 15″ laptop by manipulating Virex.

Speed up Mac 15″ laptop by manipulating Virex.

05/20/2007 Score Card Comments 0 Comment

I had been noticing that my Mac laptop had been running slow ever since I installed VirusScan (McAfee).   The real pain came when I found out that I had to use Firefox when using my blogging software WordPress.   My favorite web browser, Safari, would not work correctly with WordPress.  But here is the pain. Firefox would take forever to load, I mean at least three minutes or longer.   I decided to go into Virex and play with a setting or two. I opened up the Virus Scan application and chose to look at the Preferences.

Right away I chose to turn off “On Access Scanning”.   Then I opened up Firefox.  Pow!!  The application loaded fast!   I believe the problem was solved.


Computers
Macintosh computer Keychain problem

Macintosh computer Keychain problem

05/20/2007 Score Card Comments 0 Comment

I had not run Disk Warrior (Alsoft)  for some time and my computer was getting buggy. The computer would not shut down properly. I decided to run that utility and it came up with a whole lot of directory errors. After the utility repaired the directories I had another problem.  My .Mac synchronization would not work. When I went into the Control Panel and clicked on the .Mac icon I got a keychain error and the splash screen looped so I could not quit. I had to press Command + Option + Esc to force quit the Control Panel. I went into the Applications folder and into the Utilities folder to find the Keychain Access application. I found the .Mac account and tried to change the password but it would not allow me to do so. I went into the Keychain Access menu and chose Keychain First Aid. I asked that application to repair the keychains and it did find a lot of errors and repaired them. I tried again to change the .Mac password from within the Keychain application (Login + All + .Mac Password) but again I could not enter the password. From the Internet I discovered that all I had to do was delete the .Mac Password entry. The next time that password was needed I had a chance to enter the correct password. Sure enough, I went into the Control Panel and chose the .Mac icon and no more error message showed. The password was blank. I entered the correct password and it worked perfectly.


Computers
Whiskers surgery – Peg tube problem 5-15-07

Whiskers surgery – Peg tube problem 5-15-07

05/15/2007 Score Card Comments 0 Comment

This morning I could not get solids through the PEG tube.  I tied at least six times over two hours.  Out of frustration, I called the Critical Care facility and they suggested that I bring the cat in.   Once I arrived they took all the vital signs and found that the cat had lost one pound. They were concerned and gave me 8 cans of Eukanuba Veterinary Diet Maximum – Calorie food.  I was instructed to give 1 and 1/2 cans a day (before it was 2 and 1/2 cans).   I was told to mix about 1/2 cup of water to this new food as it had a runny consistency already.   They did find the PEG tube to be defective.   Whiskers respiration rate was just over 30 per minute.


Animal, Health
cat home care, cat peg tube problem, cat surgery, PEG tube
Whiskers – High respiration problem. 5-16-07

Whiskers – High respiration problem. 5-16-07

05/15/2007 Score Card Comments 0 Comment

We gave Whiskers his normal feeding and medicine using the PEG tube. The cat vomited a small amount about a few minutes into the feeding. I had decided to administer the food over a 10 minute time instead of 5 minutes to minimize this problem. Whiskers took all the medications and food. We moved him into the laundry room with everything he would need for 10 minutes while I went to shower and shave. After dressing for my workout I went down and let him out. I noticed that he was breathing rapidly. I took a measure and came up with 54 breaths a minute. Yesterday he was breathing just above 30.

After coming back from my work out, I measured Whiskers breathing again and it was over 50 per minute. I called Critical Care and they suggested I bring the cat in. I called my wife and she suggested I call the surgery unit. I did and found that the cat who performed the surgery had the next two days off but they would call him at home for a consultation. About a half hour later the doctor called and I told him this new development. He told me to now aspirate the stomach contents out using the PEG tub too see how much was inside the stomach just prior to each feeding. Then calculate the difference to finish giving the cat the prescribed 30 cc. It is not uncommon for cats to not move stomach contents very fast after surgery. He suggested that I bring the cat in for an X-Ray to see if there is a significant fluid buildup in the lungs.

I took the cat in to Critical Care unit and they did withdraw fluid out of the cat’s lungs.   It was interesting that they did not charge for this visit.


Animal, Health

Posts navigation

OLDER POSTS
NEWER POSTS

Categories

Archives

© 2026   DEMOCRACY 4 ALL