Husky 3200 Lumen Multi-Directional LED Work Light Review

Husky 3200 Lumen Multi-Directional LED Work Light Review

I had to do a some room remodel and needed a good portable work light.  I wanted the following features:

  • Powerful light source.
  • Easy to move the unit around.
  • Good light spread so lots of wall space would be lit.
  • Collapsible to a manageable size for movement and storage.
  • Low heat generation so the work space would not become any more uncomfortable from heat emanating from the light source.  I had up to now used tungsten halogen lights and the rooms would really get warm.
  • Low power use.  This became a feature after my choice was made.  I came to realize that in emergencies, this light could offer a reasonable light source from battery or generator.

The unit I chose was a Husky 3200 Lumen Multi – Directional LED Work light.  Husky Product number: 1001 713 235

I have been very happy with this device.  Here are some surprises:

  • I found that I could more easily see the texture coat shooting spray if I positioned the light off to one side of the my texture gun or position the light low when shooting the ceiling so I could see the spray pattern.
  • The three LED panels which can be swung around to best point the light is an incredible clever feature.   I tend to move the two side LED panels around each time I re-position the light to customize where I want the light to fall.
  • I could put this light into a tight space (see image below).
Image shows the light head illuminated and all three panels.
Image shows the light head turned on. Note that the two side LED panels swing back and forth from the main panel.

 

 

This image shows the work light extended to its full upward height. The image also shows the tripod at the bottom and the vertiacal three section stand which can be adjusted from two adjustment knobs.
This image shows the light fully extended to its tallest height. Note there are three stand sections and two stand adjustment knobs shown in red color.
The image shows the light head upon the collapsed stand but the stand legs are still extended to hold the light upward. The two LED side panels have been swung around toward the center panel to effectivly close the light from damage.
This image shows how the two side LED panels fold in toward the main panel to make a stored brick like solution to protect the LED light panels.
This image shows the light having its tripod partially collapsed against a bathroom corner and with the light stand fully drawn down so the light is as low to the floor as possible. The light is turned on and you can see the light pattern of the two side panels brighten two walls.
This image shows this light instrument being used in a very small space. In this cases, the light was used to offer light into a very small bathroom for painting.

 Update: April 7, 2018.  I have come to realize that this is not a light for professional use but rather for home owners that take good care when using their equipment.  My major complaint is the column locks and the tripod.  The column locks are, at times, difficult to lock and unlock.  Never use a wrench on those plastic locks.  The tripod is often times a pain to deploy and retract.  I have read reviews for this light and there is probably a much better unit to consider. that being PowerSmith.

Updated: April 7, 2018
Updated: March 6, 2019.  The following web page timed out:  http://www.homedepot.com/p/Husky-3200-Lumens-Batm.  New web page: https://www.homedepot.com/p/Husky-3200-Lumen-Multi-Directional-LED-Tripod-Work-Light-DE007/206839059
Comments are closed.
Share via
Copy link
Verified by MonsterInsights